TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 810 of 1555

TM

9-2320-387-24-2

24-9. RIGHT ENGINE MOUkT BRACKET REPLACEMENT

This task covers:

a.

Removal

b. Installation

INITIAL SETUP:

TOOIS

General

mechanic’s

tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Five locknuts (Appendix G, Item 121)

Manual References

TM 9-2320-387-24P

Equipment

Condition

Engine right mount and insulator removed

(para. 15-3).

Maintenance

Level

Direct support

1.

Remove

two

locknuts (lo), washers Cl), capscrews (21, and washers (1) from

support

bracket (8) and

engine mount bracket (5). Discard locknuts (10).

2.

Remove capscrew (3) and vent tube clamp (4) from engine mount bracket (5).

3.

Remove three locknuts (91, washers (7), capscrews (61, washers (71, support bracket W, and engine

mount bracket (5) from frame rail (11). Discard locknuts (9).

-1

1.

Install support bracket (8) and engine mount bracket (5) on frame rail (11) with three washers (71,

capscrews (61, washers (71, and locknuts (9).

2.

Secure support bracket (8) on engine mount bracket (5) with two washers Cl), capscrews (21,

washers (11, and locknuts (10). Tighten locknuts (10) and (9) to 90 lb-t%

(122 N-m).

3.

Install vent tube clamp (4) on engine mount bracket (5) with capscrew (3).

24-10