TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 812 of 1555

TM 9-2320-387-24-2

i-

24- 10. LEFT ENGINE MOUNT BRACKET REPLACEMENT

I

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Six locknuts (Appendix

G,

Item

121)

Manual References

TM 9-2320-387-24P

Maintenance Level

Direct support

a. Removal

1.

Remove two capscrews (21, brake line clamp (11, and oil line clamp (3) from engine mount bracket (4).

2.

Remove two locknuts (7) and washers (6) from insulator (5) and engine mount bracket (4). Discard

locknuts (7).

CAUTION

Wood block must completely cover bottom of engine oil pan or

damage to oil pan may result.

3.

Support engine under engine oil pan (12) with wood block and jack.

4.

Remove four locknuts (111, washers (91, capscrews (81, washers (9), and engine mount bracket (4)

from frame rail (10). Discard locknuts (11).

(1

1.

Install engine mount bracket (4) on frame rail (10) with four washers (91, capscrews (S), washers (91,

and locknuts (11). Tighten locknuts (11) to 90 lb-ft (122 Nom).

2.

Remove support from engine oil pan (12).

3.

Install engine mount bracket (4) on insulator (5) with two washers (6) and locknuts (7). Tighten

locknuts (7) to 90 lb-ft (122 Nom).

4.

Install brake line clamp (1) and oil line clamp (3) on engine mount bracket (4) with two capscrews (2).

24-12