TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 817 of 1555
TM
9-2320-387-24-2
I-
24-13.
TRANSMISSION
CROSSMEMBER SUPPORT BRACKET REPLACEMENT
-1
This task covers:
a. Removal
b. Installation
INITIAL
SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 11
Materials/Parts
Two locknuts (Appendix G, Item 121)
Manual References
TM 9-2320-387-24P
Equipment Condition
?t-ansmission mount crossmember removed
(para. 9-10).
Maintenance Level
Direct support
Remove two locknuts (31, washers (41, and transmission support bracket (5) from two capscrews (2) on
frame rail (1). Discard locknuts (3).
b. Installation
Install transmission support bracket (5) on two capscrews (21 on frame rail (11 with two washers (4) and
locknuts (3). Tighten locknuts (3) to 90 lb-ft
(122
N-ml.
.-
FOLLOW-ON TASK: Install transmission mount crossmember (para. g-10).
24-17
Back to Top
