TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 818 of 1555

TM 9-2320-387-24-2

1 24- 14. REAR-FRONT TIEDOWN BRACKET REPLACEMENT

I

This task covers:

a. Removal

b. Installation

INITIAL

SETUP:

Tools

Equipment Condition

General mechanic’s tool kit:

Wheel removed (nara. 8-3).

automotive (Appendix B, Item 1)

_

Maintenance Level

Materials/Parts

Six locknuts (Appendix G, Item 174)

Direct support

Manual References

TM 9-2320-387-24P

1.

Remove four locknuts (l), washers (21, capscrews (71, and washers (2) from tiedown bracket (3) and

frame rail (10). Discard locknuts (1).

2.

Remove two

locknuts (81, washers (41, capscrews (51, washers (41, vent tube mounting bracket (61,

and tiedown bracket (3) from rear suspension front crossmember mounting bracket (9). Discard

locknuts (8).

Lb’Installation

1.

Install tiedown bracket (3) on frame rail (101 with four washers (21, capscrews (7), washers (21, and

locknuts (1). Tighten locknuts (1) to 260 lb-R (353 N-m).

2.

Install tiedown bracket (3) and vent tube mounting bracket (6) on rear suspension front

crossmember mounting bracket (9) with two washers (4), capscrews (51, washers (41, and

locknuts (8). Tighten locknuts (8) to 90 lb-R (122 N-m).

24-18