TM-9-2320-428-10
TRUCK, CARGO, 8X8, M977
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-428-10 - Page 278 of 1072
SHUTDOWN CRANE
NOTE
Steps (1) through (3) are needed only if REMOTE CONTROL UNIT was
used during operation.
1.
Set ON/OFF POWER switch (1) to ON position.
Figure 18.
2.
Set ENGINE HIGH IDLE ON/OFF switch (2) to ON position.
3.
Push and release LATCH switch (3) to raise engine speed to approximately 1500 rpm.
CAUTION
•
Keep hook block at least 2 ft. (0.61 m) from end of boom. If hook block
hits end of boom it may damage cable or hook block and crane will
lose power. Wait six seconds for power to return and check crane for
damage.
•
Do not let cable unwind and become slack or cable may get tangled
on drum.
TM 9-2320-428-10
0042
0042-20
Back to Top
