TM-9-2320-428-10
TRUCK, CARGO, 8X8, M977
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-428-10 - Page 546 of 1072
REMOVE LIMP HOME SETUP FROM PASSENGER SIDE FRONT OR ANY REAR
WHEEL - Continued
Figure 11.
7.
Remove pin (12) from shackle (11) and axle stop (9).
8.
Remove shackle (11) from axle stop (9) and reinstall pin (12) in shackle (11).
9.
Lower jack (3) and remove jack (3) from equalizer beam (6).
10.
Return jack base plate (2), jack (3), 7 ft. (2.1 m) chain (10), and shackle (11) to
stowage.
11.
Remove and stow two wheel chocks (1).
INSTALL LIMP HOME SETUP/DRIVER SIDE FRONT
CAUTION
•
Do not use this procedure on fully loaded M983 vehicle with trailer in
tow. Limp home setup will not support extra weight and equipment
could be damaged.
////////////////////////////////////////////////////////////////////////////////////
/
TM 9-2320-428-10
0101
0101-8
////////////////////////////////////////////////////////////////////////////////////
/
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Back to Top
