TM-9-2320-431-10-1

TRUCK, WRECKER, 8X8, M984A1

TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 1 OF 2

JUNE 2009

TM-9-2320-431-10-1 - Page 1028 of 1244

SETUP OUTRIGGERS - Continued

NOTE

Adjust outrigger pad position as required so rod end will lower into pad

socket.

15.

Move left outrigger jack (LH O/ R JACK) control lever (20) to DOWN position and lower

outrigger jack cylinder (17) until rod end is seated in socket (19) of outrigger pad (15).

17

18

15

18

19

20

Figure 13.

16.

Install retaining pins (18) in outrigger pad (15).

JACK OUTRIGGERS

WARNING

•

Do not raise vehicle tires off ground with outrigger jack cylinders.

Vehicle could roll over. Always chock front wheels when using

outriggers. Failure to comply may result in injury or death to

personnel.

•

Crane must be level from side to side. Use of crane in unlevel position

can cause vehicle to turn. Failure to comply may result in injury or

death to personnel.

NOTE

•

Both left and right outrigger jacks can be operated from driver side or

passenger side control panels.

TM 9-2320-431-10-1

0106

0106-12