TM-9-2320-431-10-1
TRUCK, WRECKER, 8X8, M984A1
TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 1 OF 2
JUNE 2009
TM-9-2320-431-10-1 - Page 1030 of 1244
RAISE BOOM TO OPERATING POSITION - Continued
•
Do not operate crane unless outriggers are firmly in place or vehicle
could turn over. Failure to comply may result in injury or death to
personnel.
•
Keep boom clear of all electrical lines and other obstacles while
operating crane. Failure to comply may result in injury or death to
personnel.
CAUTION
•
Do not let cable unwind and become slack or cable may get tangled
on drum.
•
Do not operate crane with lockpin in lock position, damage to
equipment may result.
•
Use caution when removing slack from cable. Ensure that hook block
does not catch on hook block stowage guide or damage to fender or
hook block stowage guide may result.
1.
Move HOIST control lever (1) to DOWN position until hook block (2) rests either on
fender (3) or hook block stowage guide (4) as applicable to relieve tension on cable.
TM 9-2320-431-10-1
0106
0106-14
Back to Top
