TM-9-2320-431-10-2

TRUCK, WRECKER, 8X8, M984A1

TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 2 OF 2

JUNE 2009

TM-9-2320-431-10-2 - Page 496 of 712

Table 1.

PMCS - WEEKLY - Continued

Item

No.

Interval

Item to

be

Checked

or

Serviced

Procedure

Equipment

Not Ready/

Available If:

ure to comply may result in

injury or death to personnel.

CAUTION

Crane must be above vehicle

sides for clearance.

NOTE

Operate control levers with

light, even pressure. Moving

lever slightly will cause slow

movement of crane. Moving

lever to full travel will cause

faster movement of crane.

b. Check control levers for

malfunction, proper

response, obvious damage,

missing parts, binding, and

extreme looseness.

Controls

malfunction,

bind, or do

not re-

spond.

c.

Rotate and telescope boom.

WARNING

Ensure area is clear of per-

sonnel prior to moving

SWING lever. Boom should

be swung slowly enough so

crane operator has complete

control. Failure to comply may

TM 9-2320-431-10-2

0185

0185-62