TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 523 of 1324

LOADING - Continued

19.

After flatrack contacts rear rollers (10), increase engine speed to 1,500 to maximum

rpm until flatrack is nearly loaded. Reduce engine speed to idle.

20.

Continue loading until engaged flatrack is fully loaded and LHS NO TRANSIT indicator

(9) goes out.

21.

Release joystick (7).

22.

Pull out PARKING BRAKE control (12).

NOTE

If flatrack is not engaged in load locks, raise flatrack slightly and lower

again. Flatrack should set completely and engage load locks.

23.

Inspect that both load locks (13) have engaged and flatrack is completely loaded onto

vehicle.

TM 9-2320-434-10

0064

0064-9