TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 526 of 1324

UNLOADING - Continued

CAUTION

Ensure parking brake is not applied during unload sequence, or damage

to equipment may result.

NOTE

LHS will only operate when transmission range selector is in N (neutral).

2.

Apply service brake pedal (1) and set transmission range selector (2) to N (neutral).

4

3

7

5

2

1

6

Figure 5.

3.

Set PTO ENGAGE switch (3) to ON position. Indicator light (4) will illuminate.

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or

damage to equipment may result.

4.

Turn hydraulic selector switch (5) to AUTO.

WARNING

When loading or unloading flatracks/FRS on uneven ground (side slope

or downgrades up to 5 degrees), it may be necessary to apply vehicle

TM 9-2320-434-10

0064

0064-12