TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 535 of 1324

LOADING - Continued

•

Manual mode is used mainly in event of a failure of automatic control

electrical system. Greater care must be exercised during operation

of MANUAL mode for correct cycle of events to occur, or damage to

equipment may result.

3.

Set PTO ENGAGE switch (4) to ON position. Indicator light (5) will illuminate.

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or

damage to equipment may result.

4.

Turn hydraulic selector switch (6) to MAN H.A.

WARNING

Prior to and during any load or unload cycle, all personnel should stay

clear of LHS, flatrack, front lift adapter, and container. Failure to comply

may result in injury or death to personnel.

WARNING

Check ground conditions for firmness and extreme sideways inclination

prior to picking up or off-loading a flatrack or container. Any ground

instability beneath road wheels may result in injury or death to personnel.

WARNING

Check for overhead power lines or other obstructions prior to attempting

LHS operation. LHS reaches a height of 22 ft. 2 in. (6.7 m). Failure to

comply may result in injury or death to personnel.

TM 9-2320-434-10

0065

0065-3