TM-9-2320-434-10
TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-434-10 - Page 537 of 1324
LOADING - Continued
CAUTION
•
Engine speed must be at idle before using hydraulic selector switch,
or damage to equipment may result.
•
To avoid equipment damage, ensure that main frame cylinders do
not complete full extension while operating at engine speeds above
idle.
•
Manual mode is used mainly in event of a failure of automatic control
electrical system. Greater care must be exercised during operation
of MANUAL mode for correct cycle of events to occur or damage to
equipment may result.
•
If LHS had previously been used in manual mode and not completely
stowed in AUTO mode, the hook arm cylinders must be completely
extended or the LHS must be completely stowed using AUTO mode
before the flatrack can be loaded. Failure to comply may result in
damage to equipment.
7.
Turn hydraulic selector switch (6) to MAN M.F.
TM 9-2320-434-10
0065
0065-5
Back to Top
