TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 544 of 1324

LOADING - Continued

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or

damage to equipment may result.

21.

Turn hydraulic selector switch (6) to MAN M.F.

CAUTION

To avoid equipment damage, visually check that main frame cylinders do

not complete full retraction while operating at engine speeds above idle.

NOTE

Steps (22) through (26) require the operator to vary (increase or

decrease) engine speed.

22.

Move joystick (7) to LOAD position after flatrack (10) contacts rear rollers (11) and

increase engine speed to approximately 1,500 rpm until main frame cylinders (12)

have nearly completed full retraction.

23.

Reduce engine speed to idle and continue loading until main frame cylinders (12) are

fully retracted.

TM 9-2320-434-10

0065

0065-12