TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 618 of 1324

UNLOADING - Continued

NOTE

LHS will only operate when transmission range selector is in N (neutral).

19.

Set transmission range selector (1) to N (neutral).

20.

Move the joystick (9) to UNLOAD position to disengage LHS lift hook (12) from flatrack

hook bar (13).

21.

Set transmission range selector (1) to D (drive), release the service brake pedal (3),

and move the vehicle forward approximately 5 ft. (1.5 m).

22.

Apply service brake pedal (4).

NOTE

LHS will only operate when transmission range selector is in N (neutral).

23.

Set transmission range selector (1) to N (neutral).

24.

Move joystick (9) to LOAD position until LHS NO TRANSIT indicator (10) goes out,

indicating LHS is completely stowed.

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or

damage to equipment may result.

25.

Turn hydraulic selector switch (8) to OFF.

26.

Set PTO ENGAGE switch (6) to OFF position. Indicator light (7) will go out.

END OF TASK

END OF WORK PACKAGE

TM 9-2320-434-10

0070

0070-12