TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 614 of 1324

UNLOADING - Continued

WARNING

Prior to and during any load or unload cycle, all personnel should stay

clear of LHS, flatrack, front lift adapter, and container. Failure to comply

may result in injury or death to personnel.

WARNING

Check for overhead power lines or other obstructions prior to attempting

LHS operation. LHS reaches a height of 22 ft. 2 in. (6.7 m). Failure to

comply may result in injury or death to personnel.

NOTE

LHS will only operate when transmission range selector is in N (neutral).

3.

Apply service brake pedal (4) and set transmission range selector (1) to N (neutral).

4.

Pull out PARKING BRAKE control (5).

CAUTION

Ensure rail transport locking pins are disengaged before unloading

flatrack. Rail transport locking pins are used for rail transport only. Failure

to comply may result in damage to equipment.

5.

Set PTO ENGAGE switch (6) to ON position. Indicator light (7) will illuminate.

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or

damage to equipment may result.

6.

Turn the hydraulic selector switch (8) to AUTO or MAN H.A. (as required).

TM 9-2320-434-10

0070

0070-8