TM-9-2320-434-10
TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-434-10 - Page 612 of 1324
LOADING - Continued
14.
Turn hydraulic selector switch (5) to OFF or MAN TRANS as required.
15.
Pull out PARKING BRAKE control (10).
16.
Set PTO ENGAGE switch (3) to OFF position. Indicator light (4) will go out.
NOTE
If load locks do not engage, raise flatrack slightly and lower again.
Flatrack should seat fully and engage load locks.
17.
Inspect that load locks (11) are engaged and flatrack is fully seated on vehicle.
Back to Top
