TM-9-2320-434-10
TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-434-10 - Page 616 of 1324
UNLOADING - Continued
CAUTION
•
Do not back vehicle to push flatrack onto dock or bay. Damage to
equipment will result.
•
Do not use R (reverse) to back up vehicle while hook arm is attached
to flatrack, or damage to LHS will occur.
8.
As load continues rearward, flatrack will contact dock and flatrack will be pushed
rearward onto dock or bay.
9.
Release the joystick (9).
CAUTION
Engine speed must be at idle before using hydraulic selector switch, or
damage to equipment may result.
10.
Turn the hydraulic selector switch (8) to MAN H.A.
11.
Move joystick (9) to LOAD position until front of flatrack is raised approximately 15 in.
(38 cm) above dock or bay.
12.
Turn the hydraulic selector switch (8) to MAN M.F.
13.
Move the joystick (9) to UNLOAD position until flatrack is positioned on dock or bay.
14.
Release the joystick (9).
CAUTION
Before moving vehicle, ensure hook is not engaged to hook bar, or
damage to equipment may result.
15.
Apply the service brake pedal (4).
NOTE
It may be necessary to repeat Steps (15) through (19) several times to
clear hook arm from flatrack hook bar.
16.
Move joystick (9) to LOAD position to allow top of LHS lift hook (12) to clear flatrack
hook bar (13).
TM 9-2320-434-10
0070
0070-10
Back to Top
