OPERATOR MAINTENANCE
LOADING/UNLOADING FLATRACK (WITH OR WITHOUT ROLLERS) FROM/TO DOCK
AREA OR BAY (NOT EXCEEDING VEHICLE CHASSIS HEIGHT)
INITIAL SETUP:
Not Applicable
LOADING
CAUTION
Do not back up to loading docks in which the height of the dock exceeds
the height of bottom of the flatrack on the vehicle, or damage to equipment
may result.
1.
Position vehicle approximately 5 ft. (1.5 m) from front of flatrack.
2.
Apply service brake pedal (1).
NOTE
LHS will only operate when transmission range selector is in N (neutral).
3.
Set transmission range selector (2) to N (neutral).
TM 9-2320-434-10
0070
0070-1