TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 609 of 1324

LOADING - Continued

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or

damage to equipment may result.

5.

Turn hydraulic selector switch (5) to MAN M.F., MAN H.A., or AUTO (as required).

WARNING

Prior to and during any load or unload cycle, all personnel should stay

clear of LHS, flatrack, front lift adapter, and container. Failure to comply

may result in injury or death to personnel.

WARNING

Check for overhead power lines or other obstructions prior to attempting

LHS operation. LHS reaches a height of 22 ft. 2 in. (6.7 m). Failure to

comply may result in injury or death to personnel.

6.

Move the joystick (6) to UNLOAD. LHS lift hook (8) will raise and begin to move

rearwards. LHS NO TRANSIT indicator (7) will illuminate to indicate load locks have

been cleared.

7.

When LHS lift hook (8) has moved below level of flatrack hook bar (9), set transmission

range selector (2) to R (reverse).

TM 9-2320-434-10

0070

0070-3