TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 336 of 1616

TM 9-2320-440-13&P

0036-4

0036

MRP CONTROL STATION INDICATOR LIGHTS DO NOT OPERATE DURING LAMP TEST (CONTINUED)

THAAD0366

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 3.

Disconnect THAAD control valve harness lamp test switch connector. Check for

continuity across lamp test switch between lamp test switch connector, terminals 1 and

terminal 2, when lamp test switch is activated.

If there is no continuity, replace lamp test switch and pigtail (WP 0067).

Step 4.

Check for continuity across wire 1435 from THAAD control valve harness lamp test

switch connector, terminal 1 to a known good ground.

If there is no continuity, repair wire 1435 (TM 9-2320-325-14&P) or replace

THAAD control valve harness (WP 0088).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION