TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 341 of 1616

TM 9-2320-440-13&P

0037-3

0037

MRP DOES NOT EXTEND (CONTINUED)

THAAD0634

Step 4.

Turn engine start switch OFF (

Inspect hydraulic hoses 2742,

2743, 2760, 2761, and 2781, tubing, and fittings from MRP distribution manifold and

control valves to left and right elevation cylinders and hydraulic reservoir for leaks,

kinks, and damage (WP 0119).

If hydraulic hoses, tubes and/or fittings leak, or are damaged, tighten loose

fittings or replace damaged hoses and/or tubes (WP 0119).

THAAD0632

Step 5.

Connect pressure gage and hose to test port TP5. Soldier A starts engine

(

and checks for 3,000 psi (20,684 kPa) at test port TP5, while

Soldier B attempts to extend MRP elevation cylinders (WP 0007).

If 3,000 psi (20,684 kPa) is not measured, shut off

engine (

and go to Step 7.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

TM 9-2320-347-10)

TM 9-2320-347-10)

TM 9-2320-347-10)