TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 337 of 1616

TM 9-2320-440-13&P

0036-5/(6 blank)

0036

END OF WORK PACKAGE

MRP CONTROL STATION INDICATOR LIGHTS DO NOT OPERATE DURING LAMP TEST (CONTINUED)

THAAD0367

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 5.

Disconnect THAAD control valve harness VIM No. 2 connector (WP 0089). Check for

continuity across wire 1995 from lamp test switch connector, terminal 2 to VIM No. 2,

40 pin connector, terminal 10.

a.

If there is continuity, replace VIM No. 2 (WP 0089).

b.

If there is no continuity, repair wire 1995 (TM 9-2320-325-14&P) or

replace THAAD control valve harness (WP 0088).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION