TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 371 of 1616

TM 9-2320-440-13&P

0038-13

0038

MRP DOES NOT RETRACT (CONTINUED)

THAAD0626A

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 15.

Disconnect THAAD control valve harness VIM No. 1, 40 pin connector (WP 0089).

Check for continuity across wire 1972A from VIM No. 1 output connector, terminal 6 to

connector REC13, terminal 2.

If there is no continuity, repair wire 1972A (TM 9-2320-325-14&P) and go to

Step 16, or replace THAAD control valve harness (WP 0088) and go to Step

17.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION