TM 9-2320-440-13&P
0038-14
0038
MRP DOES NOT RETRACT (CONTINUED)
THAAD0637A
Step 16.
Disconnect THAAD control valve harness VIM No. 2, 40 pin connector (WP 0089).
Check for continuity across wire 1972B from VIM No. 2, 40 pin connector, terminal 6 to
connector REC13, terminal 3.
If there is no continuity, repair wire 1972B (TM 9-2320-325-14&P), or replace
THAAD control valve harness (WP 0088) and go to Step 17.
THAAD0634
Step 17.
Connect all connectors and install diode REC13. Start engine (
Operate MRP elevation cylinders (WP 0007). Check if MRP elevation cylinders retract.
a.
If both MRP elevation cylinders retract, problem solved.
b.
If both MRP elevation cylinders do not retract, notify Supervisor.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION