TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 383 of 1616

TM 9-2320-440-13&P

0039-3

0039

MRP LOCKS DO NOT DISENGAGE (CONTINUED)

THAAD0627

NOTE

•

MRP elevation cylinders must be in fully stowed position to disengage rack locks.

•

MRP present proximity switches must be active to engage MRP rack locks.

If MRP rack

is not loaded, activate both MRP present proximity switches by placing metal objects over

proximity switches while engaging MRP rack locks.

Step 3.

Check if left and right elevation cylinders are in there stowed position.

a.

If elevation cylinders are not stowed and MRP rack is loaded, start

engine (

stow left and right elevation cylinders

(WP 0007) and go to Step 4.

b.

If elevation cylinders are not stowed and MRP rack is not loaded, stow

left and right elevations cylinders using bypass procedure (WP 0139)

and go to Step 4.

c.

If elevation cylinders are stowed, go to Step 4.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

TM 9-2320-347-10)