TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 391 of 1616

TM 9-2320-440-13&P

0039-11

0039

MRP LOCKS DO NOT DISENGAGE (CONTINUED)

THAAD0690

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 16.

Disconnect THAAD control valve harness VIM No. 1, 40 pin connector (WP 0089).

Check for continuity across wire 1974A from THAAD control valve harness VIM No. 1,

40 pin connector, terminal 2 to rectifier REC11 connector, terminal 2.

If there is no continuity, repair wire 1974A (TM 9-2320-325-14&P) and go to

Step 17, or replace THAAD control valve harness (WP 0088) and go to Step

18.

Step 17.

Disconnect THAAD control valve harness VIM No. 2, 40 pin connector (WP 0089).

Check for continuity across wire 1974B from THAAD control valve harness VIM No. 2

40 pin connector, terminal 2 to rectifier REC11 connector, terminal 3.

If there is no continuity, repair wire 1974B (TM 9-2320-325-14&P) or replace

THAAD control valve harness (WP 0088) and go to Step 18.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION