TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 393 of 1616

TM 9-2320-440-13&P

0039-13

0039

MRP LOCKS DO NOT DISENGAGE (CONTINUED)

THAAD0469

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 19.

Disconnect THAAD compression frame harness right elevation cylinder stowed switch

connector.

Check for continuity across wire 1435 from right elevation cylinder stowed

switch connector, terminal B to a known good ground.

If there is no continuity, go to Step 22.

Step 20.

Check for continuity across wire 1963 from THAAD control valve harness VIM No. 2, 40

pin connector, terminal 35 to THAAD compression frame harness right elevation

cylinder stowed switch connector, terminal A.

If there is continuity, replace right elevation cylinder stowed switch

(WP 0072).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION