TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 388 of 1616

TM 9-2320-440-13&P

0039-8

0039

MRP LOCKS DO NOT DISENGAGE (CONTINUED)

THAAD0687

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

NOTE

•

Perform Step 10 if no vdc is present on wire 1974A at connector REC11, terminal 8 in

Step 8.

•

Perform Step 11 if no vdc is present on wire 1974B at connector REC11, terminal 8 in

Step 8.

Step 10.

Disconnect THAAD control valve harness VIM No. 1, 40 pin connector (WP 0089).

Check for continuity across wire 1974A from VIM No. 1, 40 pin connector, terminal 2 to

REC11 connector, terminal 2.

a.

If there is continuity, replace VIM No. 1 (WP 0089).

b.

If there is no continuity, repair wire 1974A (TM 9-2320-325-14&P) or

replace THAAD control valve harness (WP 0088).

Step 11.

Disconnect THAAD control valve harness VIM No. 2, 40 pin connector (WP 0089).

Check for continuity across wire 1974B from VIM No. 2, 40 pin connector, terminal 2 to

connector REC11, terminal 3.

a.

If there is continuity, replace VIM No. 2 (WP 0089).

b.

If there is no continuity, repair wire 1974B (TM 9-2320-325-14&P) or

replace THAAD control valve harness (WP 0088).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION