TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 389 of 1616

TM 9-2320-440-13&P

0039-9

0039

MRP LOCKS DO NOT DISENGAGE (CONTINUED)

THAAD0688

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 12.

Disconnect THAAD control valve harness VIM No. 2, 40 pin connector (WP 0089).

Check for continuity from wire 1963 at VIM No. 2, 40 pin connector, terminal 35 to a

known good ground.

If there is no continuity, go to Step 19.

Step 13.

Check for continuity from wire 1964 at THAAD control valve harness VIM No. 2, 40 pin

connector, terminal 36 to a known good ground.

If there is no continuity, go to Step 24.

Step 14.

Soldier A checks for continuity from wire 1957 at THAAD control valve harness VIM No.

2, 40 pin connector, terminal 38 to a known good ground, while Soldier B presses MRP

palm button switch (WP 0012).

If there is no continuity, go to Step 27.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION