TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 398 of 1616

TM 9-2320-440-13&P

0039-18

0039

MRP LOCKS DO NOT DISENGAGE (CONTINUED)

THAAD0691

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 27.

Remove MRP palm button cover (WP 0073). Check for continuity across wire 1435

from MRP palm button switch, terminal 4 adjacent to wire 1957 to a known good

ground.

If there is no continuity, repair THAAD chassis harness wire 1435

(TM 9-2320-325-14&P) or notify Supervisor.

Step 28.

Check for continuity across wire 1957 from VIM No. 2, 40 pin connector, terminal 38 to

MRP palm button switch, terminal 3.

If there is continuity, replace MRP palm button switch (WP 0073).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION