TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 535 of 1616

TM 9-2320-440-13&P

0056-1

0056

FIELD LEVEL MAINTENANCE

AXLES NO. 3 AND NO. 4 ALINEMENT

INITIAL SETUP:

LATERAL TORQUE ROD ALINEMENT

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Perform steps (1) and (2) before taking any measurements.

1.

Start engine and drive vehicle 10 ft. (3 m) straight ahead (

2.

Back vehicle up 10 ft. (3 m) and coast to a stop (

3.

Engine OFF (

4.

Wheels chocked (

NOTE

Difference between horizontal distance (A) and horizontal distance (B) should not be

greater than 0.25 in. (6.35 mm).

5.

At Axle No. 4 (1), measure horizontal distance (A) from center of tire (2) to outside edge of frame rail (3).

6.

At Axle No. 3 (4), measure horizontal distance (B) from center of tire (5) to outside edge of frame rail (3).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

THAAD0399

Tools and Special Tools

Forward Repair System (WP 0183, Item 6)

Tool Kit, General Mechanic’s: Automotive

(WP 0183, Item 25)

Materials/Parts

Locknut, (2), (WP 0184, Item 70)

Oil, Lubricating (WP 0186, Item 22)

Personnel Required

MOS 63B Wheeled vehicle mechanic (2)

References

None

Equipment Conditions

Vehicle parked on level surface

(

TM 9-2320-347-10)

TM 9-2320-347-10)

TM 9-2320-347-10)

TM 9-2320-347-10)

TM 9-2320-347-10)