TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 539 of 1616

TM 9-2320-440-13&P

0057-3

0057

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

WARNING

Equalizing beam is heavy.

Do not lift equalizing beam without the aid of Soldier B.

Failure to comply may result in serious injury to personnel.

NOTE

Both equalizing beams are removed the same way.

Right side shown.

6.

Soldier A supports equalizing beam (10) while Soldier B removes locknut (11), screw (12), two washers (13),

bushings (14), and spacers (15) from equalizing beam (10) and axle (4).

7.

Soldier A and Soldier B remove locknut (16), screw (17), two spacers (18), and equalizing beam (10) from

frame bracket (19).

8.

Repeat steps (6) and (7) to remove left side equalizing beam.

9.

Soldier A and Soldier B remove axle (4) from vehicle.

10. Remove suitable lifting device from axle (4).

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

- -

-

-

-

-

-

-

-

-

-

-

THAAD0110