TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 546 of 1616

TM 9-2320-440-13&P

0058-2

0058

INSTALLATION

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Auxiliary work lamps are installed the same way. MRP control work lamp shown.

1.

Slide one side of auxiliary work lamp (9) into lamp bracket (6) under tab (8) and push auxiliary work lamp (9)

into lamp bracket (6) until auxiliary work lamp (9) snaps into place.

2.

Feed lamp connector (1) through opening in mounting bracket (7).

3.

Install lamp bracket (6) on mounting bracket (7) with two screws (5), washers (4), and locknuts (3).

4.

Connect lamp connector (1) to connector (2).

END OF TASK

FOLLOW-ON MAINTENANCE

1.

Connect batteries TM 9-2320-325-14&P.

2.

Remove wheel chocks (

END OF TASK

END OF WORK PACKAGE

THAAD0049

TM 9-2320-347-10)