TM-9-2320-440-13-P
TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2010
TM-9-2320-440-13-P - Page 641 of 1616
TM 9-2320-440-13&P
0076-9/(10 blank)
0076
ADJUSTMENT
WARNING
Remove all jewelry such as rings, dog tags, bracelets, etc.
If jewelry or tools
contact positive electrical circuits, a direct short may result.
Damage to equipment
and injury or death to personnel may occur.
1.
Connect batteries (TM 9-2320-325-14&P).
2.
Start engine and stow LHS (WP 0011).
3.
Put PTO ENGAGE switch (22) in ON position. Ensure indicator light (23) illuminates.
4.
Turn hydraulic selector switch (24) to MAN HOOK ARM position, and raise hook arm (21) until sensor
plate (20) covers approximately half of proximity switch (14).
5.
Shut off engine (
6.
Loosen two nuts (13).
7.
Using feeler gage, adjust clearance between proximity switch (14) and sensor plate (20) to 0.125 ± 0.01 in.
(3.175 ± 0.25 mm) and tighten two nuts (13).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Connect batteries (TM 9-2320-325-14&P)
2.
Check LHS operation and verify proximity switch is working properly (WP 0011).
3.
Remove wheel chocks (
END OF TASK
END OF WORK PACKAGE
THAAD0063
TM 9-2320-347-10)
TM 9-2320-347-10)
Back to Top
