TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 695 of 1616

TM 9-2320-440-13&P

0088-5

0088

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

19. Remove two THAAD control valve harness connectors (34) from two relays (35).

20. Remove six screws (36), THAAD control valve harness connectors (37), and gaskets (38) from solenoids (39).

Discard gaskets.

21. Remove screw (40), THAAD control valve harness connector (41), and gasket (42) from free-flow valve (43).

Discard gasket.

22. Remove THAAD control valve harness (14) from vehicle.

END OF TASK

INSTALLATION

NOTE

Install cable ties and cushion clips as required.

1.

Position THAAD control valve harness (14) on vehicle.

2.

Install gasket (42) and THAAD control valve harness connector (41) on free-flow valve (43) with screw (40).

3.

Install six gaskets (38) and THAAD control valve harness connectors (37) on solenoids (39) with screws (36).

4.

Connect two THAAD control valve harness connectors (34) on relays (35).

5.

Connect two THAAD control valve harness connectors (32) on hydraulic pressure transducer connectors (33).

6.

Install two THAAD control valve harness connectors (30) on VIM #2 (31) and tighten screws (29).

7.

Install two THAAD control valve harness connectors (27) on VIM #1 (28) and tighten screws (26).

8.

Connect three THAAD control valve harness connectors (24) on J1939 BUS harness connectors (25).

THAAD0462