TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 701 of 1616

TM 9-2320-440-13&P

0089-3

0089

4.

Soldier A and Soldier B remove four locknuts (8), screws (9), and mounting bracket (7) from hydraulic

manifold assembly (10). Discard locknuts.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

5.

Soldier A and Soldier B remove screw (12), lockwasher (14), washer (13) from bracket (15).

END OF TASK

INSTALLATION

NOTE

Install cable ties as required.

1.

Soldier A and Soldier B install mounting bracket (7) on hydraulic manifold assembly (10) with screw (12),

lockwasher (14) and washer (13).

2.

Soldier A and Soldier B install mounting bracket (7) on hydraulic manifold assembly (10) with four screws (9)

and locknuts (8).

3.

Soldier A and Soldier B install VIM #2 (4) and VIM #1 (1) on mounting bracket (7) with six screws (6), locknuts

(5) and 12 washers (11).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

All connectors are installed the same way. Connector for VIM #1 shown.

4.

Connect connector (4) to VIM #1 (1) and tighten screw (3).

5.

Repeat step (3) for three remaining connectors.

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

- -

-

-

-

-

-

-

-

-

-

-