TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 703 of 1616

TM 9-2320-440-13&P

0090-1

0090

FIELD LEVEL MAINTENANCE

WORK LAMP SWITCH REPLACEMENT

INITIAL SETUP:

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Both outrigger and MRP work lamp switches are removed the same way. Outrigger work

lamp switch shown.

•

Tag and mark connectors prior to removal to ensure proper installation.

•

Remove cable ties as required.

1.

Disconnect connector (1) from connector (2).

2.

Remove two locknuts (3), washers (4), screws (5), switch bracket (6), and switch (7) from bracket (8). Discard

locknuts.

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

THAAD0151

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0183, Item 25)

Materials/Parts

Locknut, (2), (WP 0184, Item 24)

Tags, Identification (WP 0186, Item 32)

Ties, Cable, Plastic (WP 0186, Item 34)

Personnel Required

MOS 63B Wheeled vehicle mechanic

References

None

Equipment Conditions

Engine OFF (

Wheels chocked (

Batteries disconnected TM 9-2320-325-14&P

TM 9-2320-347-10)

TM 9-2320-347-10)