TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 851 of 1616

TM 9-2320-440-13&P

0119-1

0119

FIELD LEVEL MAINTENANCE

HYDRAULIC HOSE REPLACEMENT

INITIAL SETUP:

TYPICAL HYDRAULIC COUPLING REMOVAL

NOTE

•

This procedure only shows location of THAAD hydraulic lines. Refer to

TM 9-2320-325-14&P for vehicle hydraulic lines. It will never be necessary to remove all

hydraulic lines at once.

•

Hydraulic lines are connected with compression fittings or preformed packings.

Fitting

from which hydraulic line is being removed or installed can be an elbow, tee, adapter on a

valve, other hydraulic component or hydraulic line.

All compression fittings are removed

and installed the same way.

Elbow fitting is shown.

•

Tag and mark hydraulic lines prior to removal to ensure proper installation.

•

Cap and plug hydraulic lines upon removal.

•

Remove and install cable ties as required.

1.

Loosen fitting (1) and remove preformed packing (2) and hose (3) from elbow (4).

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

THAAD0354

Tools and Special Tools

Set, Cap and Plug (WP 0183, Item 17)

Tool Kit, General Mechanic’s: Automotive

(WP 0183, Item 25)

Materials/Parts

Tags, Identification (WP 0186, Item 32)

Ties, Cable, Plastic (WP 0186, Item 34)

Personnel Required

MOS 63B Wheeled vehicle mechanic

References

TM 9-2320-325-14&P

Equipment Conditions

Engine OFF (

Wheels chocked (

Hydraulic reservoir drained (WP 0120) (Only

when replacing reservoir lines)

TM 9-2320-347-10)

TM 9-2320-347-10)