TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 849 of 1616

TM 9-2320-440-13&P

0118-3

0118

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

- .

2.

Loosen two nuts (5 and 6) and remove fittings (3 and 4) and preformed packings (7 and 8) from hydraulic

filter (9). Discard preformed packings.

3.

Remove four screws (10), lockwashers (11), and hydraulic filter (9) from bracket (12). Discard lockwashers.

NOTE

Perform step (4) if bracket needs to be removed.

4.

Remove two locknuts (13), screws (14), and bracket (12) from vehicle. Discard locknuts.

5.

Refer to Crane Hydraulic Fluid Filter Assembly and Mounting Bracket Removal/Repair/Installation

(TM 9-2320-325-14&P), for hydraulic filter disassembly, cleaning/inspection, and assembly.

END OF TASK

INSTALLATION

1.

Install bracket (12) on vehicle with two screws (14) and locknuts (13).

2.

Install hydraulic filter (9) on bracket (12) with four lockwashers (11) and screws (10).

3.

Lightly lubricate two preformed packings (7 and 8) with clean oil and install two preformed packings (7 and 8)

and fittings (3 and 4) on hydraulic filter (9) and tighten two nuts (5 and 6).

THAAD0217