TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010
TM-9-2320-440-13-P

  TM-9-2320-440-13-P - Page 852 of 1616

TM 9-2320-440-13&P
0119-2
0119
TYPICAL HYDRAULIC COUPLING INSTALLATION
1.
Install preformed packing (2) and hose (3) on elbow (4) and tighten fitting (1).
END OF TASK
TYPICAL CLIP, CLAMP, AND BRACKET REMOVAL
NOTE
•
All clips, clamps, and brackets are removed and installed the same way.
•
Mark position of brackets.
1.
Remove locknut (1), washer (2), cushion clip (3), screw (4), washer (5), plate (6), and two clamps (7) from
bracket (8).
2.
Remove two nuts (9), screws (10), and bracket (8) from vehicle.
END OF TASK
THAAD0354
THAAD0355


Back to Top