TM-9-2320-440-13-P
TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2010
TM-9-2320-440-13-P - Page 89 of 1616
TM 9-2320-440-13&P
0013-3
0013
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
WARNING
Keep hands and feet clear of outriggers during outrigger/stabilizer extension and
retraction. Failure to comply may result in injury or death to personnel.
NOTE
•
Left and right outrigger (OUTRIGGER LH and OUTRIGGER RH) control levers can be
operated independently or at the same time.
•
Outrigger movement from one lever may be slower than the other when operating two
levers together.
9.
Push and hold palm button switch (9).
10.
Move OUTRIGGER LH control lever (10) and OUTRIGGER RH control lever (11) to EXTEND position to
deploy outriggers.
11.
Release palm button switch (9).
12.
Clean all foreign material from socket (12) in outrigger pad (7) and from end of outrigger stabilizer
cylinder rod (13).
13.
Position outrigger pad (7) directly below outrigger stabilizer cylinder rod (13) on left side of vehicle.
14.
Remove two retaining pins (14) from outrigger pad (7).
15.
Repeat steps (12) through (14) for right side outrigger.
THAAD0199
Back to Top
