TM-9-2320-440-13-P
TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2010
TM-9-2320-440-13-P - Page 80 of 1616
TM 9-2320-440-13&P
0011-12
0011
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
CAUTION
Do not use R (Reverse) to back up vehicle while hook arm is attached to MRP.
Failure to comply may result in damage to equipment.
NOTE
•
Engine speed is set at idle. However, slight increase in engine speed may be necessary
depending on terrain.
•
LHS will only operate when transmission range selector is in N (Neutral).
20.
Set transmission range selector (2) to D (Drive) and release service brake pedal (1).
21.
Set transmission range selector (2) to N (Neutral).
22.
Move joystick (6) to LOAD position momentarily, and then to UNLOAD position to let hook arm (9)
disengage from MRP hook bar (10).
23.
Repeat step (19) until hook arm (9) disengages MRP hook bar (10).
24.
Set transmission range selector (2) to D (Drive) and move vehicle forward approximately 5 ft. (1.5 m).
25.
Stop vehicle and set transmission range selector (2) to N (Neutral).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
THAAD0285
Back to Top
