TM-9-2320-440-13-P
TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2010
TM-9-2320-440-13-P - Page 75 of 1616
TM 9-2320-440-13&P
0011-7
0011
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
31.
Connect vehicle ground cable (15) to ground rod (16).
32.
Connect MRP ground cable to MRP ground bar (Refer to THAAD Launcher IETM)
33.
Disconnect vehicle static reel cable (14) from ground rod (16).
34.
Disconnect MRP static reel cable (Refer to THAAD Launcher IETM) from ground rod.
35.
Connect umbilical and ADU/IL cables (Refer to THAAD Launcher IETM).
36.
Refer to WP 0006 if preparing to transport MRP over-the-road.
END OF TASK
b.
Unloading MRP in AUTO Mode.
WARNING
•
Check for overhead power lines or other obstructions before attempting LHS
operation.
Failure to comply may result in injury or death to personnel.
•
Check ground conditions for firmness and that sideways inclination is no greater
than 5 degrees before loading or unloading an MRP.
Failure to comply may result
in injury or death to personnel.
•
During any load or unload cycle, all personnel must stay clear of LHS and MRP.
Failure to comply may result in injury or death to personnel.
•
When loaded with MRP, the center of gravity is moved up and toward rear of
vehicle.
Extreme caution must be taken when turning and ascending or
descending on a grade.
Failure to comply may result in injury or death to
personnel.
•
Maximum side slope while operating a HEMTT THAAD loaded with an MRP is 20
percent. Failure to comply may result in injury or death to personnel.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- -
-
-
-
-
-
-
-
-
-
-
Back to Top
