TM-9-2320-440-13-P
TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2010
TM-9-2320-440-13-P - Page 76 of 1616
TM 9-2320-440-13&P
0011-8
0011
CAUTION
•
Before starting any LHS operations, clean all operating components of snow, ice,
sand, or mud.
Failure to comply may result in damage to equipment.
•
Before starting any LHS operations, adjust extension mirror to monitor LHS
operations.
Failure to comply may result in damage to equipment.
•
If terrain is deeply rutted, soft soil, etc., mud flaps must be pinned up before
beginning LHS operation.
Failure to comply may result in damage to equipment.
•
Only operate the LHS system in AUTO mode.
Failure to comply may result in
damage to equipment and/or MRP.
•
Outriggers must be stowed before loading or unloading an MRP. Failure to comply
may result in damage to equipment.
NOTE
Before loading or unloading an MRP, verify that MRP rack locks are fully retracted
(WP 0012) and deck elevation cylinders are fully stowed. If either of these criteria are not
met, vehicle’s safety interlocks will not allow LHS to operate.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
NOTE
When both MRP rack locks are fully disengaged, RACK LOCKS ENGAGED indicator light
will be extinguished.
1.
Verify that both MRP rack locks are disengaged (WP 0012).
2.
Ensure MRP deck-to-subframe locks are engaged (Refer to THAAD Launcher IETM).
3.
Disconnect umbilical and ADU/IL cables (Refer to THAAD Launcher IETM).
4.
Stow MRP under-run bumper (Refer to THAAD Launcher IETM).
THAAD0198
Back to Top
