TM-9-2320-440-13-P
TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2010
TM-9-2320-440-13-P - Page 73 of 1616
TM 9-2320-440-13&P
0011-5
0011
CAUTION
Ensure that parking brake is not applied before starting load sequence.
Failure to
comply may result in damage to equipment.
20.
Move joystick (7) to LOAD position, allowing vehicle to be pulled under MRP.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
WARNING
Ensure that MRP Subframe contacts LHS rear rollers correctly. Failure to comply
may result in serious injury or death to personnel and damage to equipment.
CAUTION
Reduce engine speed to idle before MRP Subframe contacts rear rollers. Failure to
comply may result in damage to equipment.
21.
As load is lifted, vehicle will be pulled under MRP. Some steering wheel adjustment may have to be
made to ensure that MRP Subframe (10) will contact rear rollers (11).
22.
Before MRP contacts rear rollers (11), reduce engine speed.
23.
Apply service brake pedal (3) after MRP Subframe (10) contacts rear rollers (11).
NOTE
Engine speed will require increasing and decreasing in the following steps to facilitate
performance.
24.
After MRP contacts rear rollers (11), increase engine speed to 1,500 rpm until MRP is nearly loaded.
Reduce engine speed to idle.
25.
Continue loading until engaged MRP is fully loaded and LHS NO TRANSIT indicator light (9) is
extinguished.
26.
Release joystick (7).
27.
Pull out PARKING BRAKE control (12).
THAAD0293
Back to Top
