TM-9-2320-440-13-P
TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2010
TM-9-2320-440-13-P - Page 79 of 1616
TM 9-2320-440-13&P
0011-11
0011
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
16.
Release service brake pedal (1) and allow grounded MRP to push vehicle straight forward from under
MRP.
17.
As front of MRP approaches within approximately 8 in. (20.32 cm) of ground, decrease engine speed to
idle and apply service brake pedal (1).
CAUTION
Once vehicle’s rear suspension has been relieved of MRP load, do not continue in
UNLOAD position as possibility of jacking up rear of vehicle with hook arm may
occur. Failure to comply may result in damage to equipment.
18.
Stop when MRP Subframe is about 6 inches from the ground. Disconnect the stow bail bar lock on MRP
(Refer to THAAD Launcher IETM), continue unloading until MRP Subframe (8) is on ground and rear
suspension is unloaded.
19.
Release joystick (6) when MRP Subframe (8) is resting on ground.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- -
-
-
-
-
-
-
-
-
-
-
THAAD0286
Back to Top
