TM-9-2320-440-13-P
TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2010
TM-9-2320-440-13-P - Page 92 of 1616
TM 9-2320-440-13&P
0013-6
0013
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
WARNING
Keep clear of hydraulic cylinders during operation. Failure to comply may result in
injury or death to personnel.
NOTE
•
Left and right outrigger stabilizer (STABILIZER LH and STABILIZER RH) control levers
can be operated independently or at the same time.
•
Outrigger stabilizer movement from one lever may be slower than the other when
operating two levers together.
•
Air suspension will automatically inflate when outriggers are stowed.
4.
Push and hold palm button switch (9).
5.
Move STABILIZER LH control lever (15) and STABILIZER RH control lever (16) to UP position to retract
outrigger stabilizer cylinder rods (13) completely from outrigger pad socket (12).
6.
Release palm button switch (9).
7.
Install two retaining pins (14) in each outrigger pad (7).
WARNING
Keep hands and feet clear of outriggers during outrigger/stabilizer extension and
retraction. Failure to comply may result in injury or death to personnel.
NOTE
•
Left and right outrigger stabilizer (OUTRIGGER LH and OUTRIGGER RH) control levers
can be operated independently or at the same time.
•
Outrigger movement from one lever may be slower than the other when operating two
levers together.
8.
Push and hold palm button switch (9).
9.
Move OUTRIGGER LH control lever (10) and OUTRIGGER RH control lever (11) to RETRACT position
to stow outriggers.
10.
Release palm button switch (9).
THAAD0199
Back to Top
