TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 165 of 576

TM 9-2330-227-14&P

BRAKESHOE ASSEMBLIES, TWO-WHEEL CYLINDER - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

INSPECTION/REPLACEMENT - CONTINUED

9.

INSTALLATION

10.

Spider (3)

11.

12.

Two brakeshoe

assemblies (6)

13.

Spider (3) and

backing plate (10)

14.

Two brakeshoe

assemblies (6)

and pins (4) and (5)

All parts

Two fixed pins (4)

Two removable

pins (5)

Two washers (7),

screws (8), and

Iockwashers (9)

Two brakeshoe

assemblies (6) with

screws (8),

washers (7), and

Iockwashers (9)

Four springs (1)

Look for bends, cracks, gouges, breaks,

or severe signs of wear.

Using ball-peen hammer, tap into place.

Put in place.

Make sure slots in pins lineup

with slots in spider.

Put in place.

a. Put in place.

b. Screw in, and tighten screws (8)

using 1/2-inch socket, 6-inch

extension, and ratchet handle with

1/2-inch drive.

Using brake repair pliers, put in place.

Short springs goon removeable

pins.

4-87