TM 9-2330-227-14&P
CHOCK BLOCKS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
14.
Chock block
frame (1) and
deck (2)
15.
Chain (6)
16.
Pin (8)
17.
18.
19.
Chock block
frame (1)
20.
Frame member (15)
21.
Pins (8) and (17)
22.
Chain (6) and
pin (17)
Four Iockwashers
(3), screws (4),
and nuts (5)
Clip (7)
Cotter pin (9)
and washer (10)
Plate (11)
Washer (12) and
cotter pin (13)
Chock block (14)
Chain (16)
Plate (11)
Clip (7)
With aid of assistant, screw in and
tighten using number two cross-tip
screwdriver, 7/16-inch socket, and
ratchet handle with 3/8-inch drive.
Put in place.
a. Put in pin (9), and bend using slip
joint pliers.
b. Put washer (10) in place.
Put in place with end on pin (8).
a. Put washer (12) in place.
b. Put in pin (13), and using slip-joint
pliers, bend back.
Slide in place.
Hook .
Put in place with end on pin (17).
Put in place.
4-180